Valves Division

Opening Soon

SITE IS UNDER MAINTENANCE. THANK YOU FOR WAITING! :)

we are only a phone call away

+971 4 2073888
CALL US NOW

04 207 3888

Sun-Thursday: 6.30 A.M to 5.45 P.M

OUR SERVICES

274-106 Al Qusais Industrial Area 4,
Al Qusais, Dubai UAE

04 207 3888

04 267 2335

WELCOME

Self-reliance in Control & Instrumentation and the growing need for a local support organization for the supply of instrumentation and control systems were the prime objectives when Binghalib Group started operation in 1981.

 

Realizing the importance of a local servicing needs, we have established in 1991 service and maintenance facility, 'SERVTECH', dedicated to the service of field valves, flow meters,instrumentation and control systems related to Oil, Power, Water, Petrochemical, Gas and Process Industry.

OUR SERVICES

DIMENSIONAL

Servtech dimensional calibration services are designed to ensure that your hand tools and measuring instruments provide reliable, precise, traceable measurement results.

Servtech trained technicians provide expert calibration of all types of precision dimensional gauges, and hand tools. Our dimensional laboratory is environmentally controlled ensuring the correct atmosphere for the precise measurements your instruments require.

The Dimensional Calibration Process:

Calibration is carried out by comparing the test instrument with most accurate and traceable standard to confirm if the unit under test meets standards criteria. The details of the calibration result is reported on calibration certificate.

After the completion of the service, we will provide you with the calibration certificate/test report of your instrument & the service done.

ELECTRICAL

Electrical Calibration: 

 

Electrical calibration is performed by highly trained technicians and high-tech equipment to provide results that will give you confidence in the capabilities of your Electrical instruments. Accuracy, affordability and timeliness drive our processes and procedures. As the premier provider of accredited electrical calibration services, Servtech services a comprehensive range of meters and testers including the calibration of multimeters , Insulation testers, Clamp meters, and more.

 

The Process of Electrical Calibration:

 

Each electrical instrument are calibrated by following a documented procedure. The unit under test is compared with the more accurate standard master having tractability and check whether the instrument meet manufacturer accuracy. The details of these results are clearly reported on your Calibration Certificate, along with “as found. After the completion of the service, we will provide you with the calibration certificate/test report of your instrument & the service done.​​​​

HUMIDITY

Humidity measurements can be essential to the processes of many of our customers in the pharmaceuticals, life sciences, and manufacturing industries.

The Process of Humidity Calibration:

There is a humidity chamber which produces reference humidities that meet traceable standards. The chamber include a humidity calibrator, which provides the highest accuracy available for relative humidity (RH) from 10% to 90%

Device can be tested against a range of humidities inside the chamber. Offsets are measured and your device is adjusted if required. Your calibrated humidity device is returned to you with full documentation.

After the completion of the service, we will provide you with the calibration certificate/test report of your instrument & the service done.

MASS

Servtech Mass Calibration services include tool calibration for a variety of measuring tools . 

The Process of Mass Calibration:

We equipped with a number of scales designed to handle mass calibration of standards and instruments at various weights and accuracies. The calibration entails a weight comparison from the scale readout against a known standard or mass value. The precision mass standards used for calibration are of a known accuracy.

Calibration is performed in a lab with constant temperature and humidity control to ensure that instruments are stabilized before and during measurement. The controlled room is maintained at 68°F ± 1°F with 50-60% relative humidity

After the completion of the service, we will provide you with the calibration certificate/test report of your instrument & the service done.

PRESSURE

The Process of Pressure Calibration:

Typically digital pressure modules having range from -14.5 psi to 40,000 psi are used for pressure calibration for hydraulic pressure and -14.5 psi - 1500 psi in pneumatic pressure.

The calibration is carried out by direct comparison of the measurement values of the calibration item with those of the reference or working standard which has been directly or indirectly traced back to a national standard. Important principle in calibration practice is to document every instrument’s calibration as it was found and as it was left after adjustments were made. The purpose for documenting both conditions is to make data available for calculating instrument drift over time. If only one of these conditions is documented during each calibration event, it will be difficult to determine how well an instrument is holding its calibration over long periods of time. Excessive drift is often an indicator of impending failure, which is vital for any program of predictive maintenance or quality control.​

Servtech Technical Services is one of the biggest service company in the Binghalib Group. Servtech offers more than 20 years of experience providing services to the Oil & Gas, Power, Water & Offshore

274-106 Al Qusais Industrial Area 4,
Al Qusais, Dubai UAE

04 207 3888

  • White Facebook Icon

04 267 2335

Copyright © 2019 Servtech Technical Services