Valves Division

Opening Soon

SITE IS UNDER MAINTENANCE. THANK YOU FOR WAITING! :)

we are only a phone call away

+971 4 2073888
CALL US NOW

04 207 3888

Sun-Thursday: 6.30 A.M to 5.45 P.M

OUR SERVICES

274-106 Al Qusais Industrial Area 4,
Al Qusais, Dubai UAE

04 207 3888

04 267 2335

WELCOME

Self-reliance in Control & Instrumentation and the growing need for a local support organization for the supply of instrumentation and control systems were the prime objectives when Binghalib Group started operation in 1981.

 

Realizing the importance of a local servicing needs, we have established in 1991 service and maintenance facility, 'SERVTECH', dedicated to the service of field valves, flow meters,instrumentation and control systems related to Oil, Power, Water, Petrochemical, Gas and Process Industry.

OUR SERVICES

MASTER ULTRASONIC FLOWMETER

Capabilities:

  • Verification upto 48 inch onsite for variou vine material including crude oil, jet fuel, water, diesel and various other liquids

  • Can measure gas upto 48 inch pipeline

  • Pipe thickness can be measured

  • Accuracy of 0.5 % of star UFM if field calibrate

  • Standard

PROVER CALIBRATION

Essential to maintaining measurement accuracy, provers must provide a reliable means to verify meter readings and establish and certify the meter factors. Prover calibration service can help you control product loss and gain substantial savings by providing:

• On-site calibration of small volume provers sizes 8” to 40”

• Water draw certificate of calibrated volumes
• Prover seal leak check, repair and upgrade services

• Inspection of hardware and electrical components 

• Quick replacement of genuine hardware parts

• Upgrade recommendations to improve operation and performance of    the prover 

Purpose of prover calibration

• Custody transfer contractual requirements
• Check mechanical conditions of the prover

• Verify prover accuracy Fulfill API minimum recommended calibration every 3 years.

MASTER METER FLOW LAB

All Doubt Calibration of Liquid Flow Meters Calibration "beyond all doubt" Defining the measurement error or k-factor of a liquid flow meter with low measurement uncertainty is always a challenge. Mass and volume flow or batch meters need different calibration methods to achieve this goal. Servtech can determine any output signal utilizing three different calibration methods for liquid flow meters. The calibration facility is the National Standard for the Netherlands and has the lowest measurement uncertainty (CMC) in the world. Many different calibrations can be performed using different written standards like, ISO, API, OIML etc.. to achieve your calibration needs. All flow meter calibrations of Servtech are accepted around the world by other NMI’s as on Servtech certificates you can find the CIPM MRA logo next to the logo of the ISO/IEC17025 accreditation. Every year millions of cubic meters pass through modern large scale systems for production, transport and distribution of all kinds of liquids. Measurements are the basis for revenues, costs and process yield. An incorrect measurement of just one-tenth of a percent can cause a significant difference in profit. Calibration with traceable measurement standards is vital for accurate measurements.

FACTORY ACCEPTANCE TEST

We perform Factory Acceptance Test Services on every system. We have developed our unique Factory Acceptance Test (FAT) for every process system we produce must pass through this state-of-the-art test before installing the final system. Our goal is to get your process system up-and-running with less delay and eliminate unnecessary downtime.

Our standard Factory Acceptance Test (FAT) include:

  • Production trials

  • Operational test

  • Hydrostatic test

  • Dye penetration test

  • Passivation test

  • Radiography test

  • Factory acceptance test for metering skids

  • Commissioning of metering skids

TANK CALIBRATION

Tank calibration for shore and ship installations, terminals, and tank farms. Servtech provides accurate and detailed measurement and calibration of large petroleum, fuel, and chemical cargo storage tanks. Tank calibration includes shore tanks and ship tanks used for holding crude oil, refined petroleum products, LPG, LNG, and other wet or dry bulk cargoes. Using the latest technology for tank calibration, engineers and technicians are equipped with state-of-the-art measuring devices. Servtech measures and calibrates tanks of various shapes, sizes and designs. Loss Control investigations are available from seasoned experts with years of industry experience.

Storage tank calibration:

  • Horizontal and Vertical Land Tanks Calibration

  • Internal and external tank calibration by EODR (Electro-Optical Distance Ranging) 

  • Pipeline Volume Calculations 

  • Custody Transfer Systems (CTS) 

  • Ship and Barge Tank Volume Calculations 

Servtech Technical Services is one of the biggest service company in the Binghalib Group. Servtech offers more than 20 years of experience providing services to the Oil & Gas, Power, Water & Offshore

274-106 Al Qusais Industrial Area 4,
Al Qusais, Dubai UAE

04 207 3888

  • White Facebook Icon

04 267 2335

Copyright © 2019 Servtech Technical Services